1. Home
  2. Knowledge Base
  3. Community Edition v7.0 Administration Guide
  4. Network | NIC | Update

Network | NIC | Update

How to update the configuration settings of a NIC:

    1. Go to the Network > NIC page.
    2. Find the NIC that you want to update the configuration settings for within the NIC List table.
    3. Hover over it and click the Pencil Icon

configuration settings of a NIC

  1. Enter the new configuration settings in the following fields:
    • IP Address: The IP address of the NIC.
    • Netmask/CIDR: The subnet mask of the NIC.
    • Gateway: The default gateway for the NIC.
  2. Click the Apply button to save the changes.

Important Notice!
The Netmask and Gateway fields must be configured in the same stack as the IP address.

Additional notes:

  • The Name and MAC fields are not editable.
  • IPv4 and IPv6 stacks are supported.

Next Article: Network | VLAN

Was this article helpful?
Yes No

Related Articles

Need Support?

Can't find the answer you're looking for?
Contact Support

Download Skudonet ADC Load Balancer
Community Edition

Source Code

A versatile and installable ADC system designed for diverse vendor hardware.

DOWNLOAD SOURCE

Installable ISO 

Load Balancing as a Service alongside an ADC orchestration toolkit.

DOWNLOAD ISO
Download Community Edition

Download Community Edition

“We manage the information you provide with the sole aim of assisting with your requests or queries in regards to our products or services; applying the computer and security procedures to ensure its protection. Your data can be rectified or removed upon request but won’t be offered to any third parties, unless we are legally required to do so.” Responsible: SKUDONET SL - info@skudonet.com