1. Home
  2. Knowledge Base
  3. Enterprise Edition v6.3 Administration Guide
  4. Network | Gateway

Network | Gateway

The default gateway is the IP address that the SKUDONET load balancer uses to route inbound and outbound traffic between the LAN and the Internet. To configure the default gateway for the load balancer, one must first open the gateway table.

Gateway Table

The tables below show the default gateway that the load balancer uses for IPv4 and IPv6 traffic.

Each table includes the following fields:
Address: The IP address of the device that the load balancer will send traffic to in order to reach the Internet. This can be an IPv4 or IPv6 address.
Interface: The network interface on the load balancer that will be used to send traffic to the default gateway.
Actions: These actions can be used to manage the default gateway:

  • Configure: Configures the default gateway for the load balancer in its respective stack.
  • Unset: Removes the configuration and its default gateway.

Next Article: Network | Gateway | Configure

Was this article helpful?
Yes No

Related Articles

Contents

Need Support?

Can't find the answer you're looking for?
Contact Support

Download Skudonet ADC Load Balancer
Community Edition

Source Code

A versatile and installable ADC system designed for diverse vendor hardware.

DOWNLOAD SOURCE

Installable ISO 

Load Balancing as a Service alongside an ADC orchestration toolkit.

DOWNLOAD ISO
Download Community Edition

Download Community Edition

“We manage the information you provide with the sole aim of assisting with your requests or queries in regards to our products or services; applying the computer and security procedures to ensure its protection. Your data can be rectified or removed upon request but won’t be offered to any third parties, unless we are legally required to do so.” Responsible: SKUDONET SL - info@skudonet.com