1. Home
  2. Knowledge Base
  3. Enterprise Edition v6.2 Administration Guide

Enterprise Edition v6.2 Administration Guide

Network | VPN | Create

Contents1 Create VPN1.1 Authentication1.2 Local1.3 Remote1.4 Phase 11.5 Phase 2 Create VPN In this section, you’ll learn how to set...

Network | VPN

This section briefly describes the VPN network embedded on ZEVENET Load Balancer. The virtual private network allows flexible and scalable...

LSLB | SSL Certificates | Generate PEM

This segment oversees the formation of PEM certificates void of a passphrase and incorporates the Private Key within the same...

LSLB | Let’s Encrypt

Let’s Encrypt Certificate Overview Within this segment, we delve into the SKUDONET Application Delivery Controller, an application that interfaces with...

System | Support Save

ZEVENET Support Save The SupportSave section allows a user to generate a tarball gzip compressed file with all essential information...

System | License

ZEVENET License This section shows the software license of ZEVENET which is based on the GNU Affero General Public License...

System | Activation Certificate

ZEVENET Activation Certificate This section shows the details of the Activation Certificate of ZEVENET Enterprise Edition. In the first section,...

System | Logs | Show

Log Show When you click in the Show action, a new screen is shown as follows: In this view, you...

System | Logs

Log List This section allows you to access the system and load balancer logs to analyze problems and gather further...

System | User

System Users This section allows users that have logged into the load balancer to change access credentials. Here is a...

System | Notifications | Configure Alerts

In this section, you will configure alert services, backends, and clusters. Once the configuration options have been modified, just click...

System | Notifications

This section describes how Notifications work by alerting and sending emails in case an unexpected event is detected in the...

System | Factory Reset

Factory Reset The Factory reset section allows a user to roll the load balancer back to a clean slate. Use...

System | Cluster

This section allows you to manage the clustering service. The high availability management for load balancing services is facilitated by...

System | Backups | Upload

This section allows uploading and storing a local backup file into the load balancer. Upload Backup The page allows you...

System | Backups | Create

This section allows the creation of a backup file with the entire configuration of the load balancer. Create Backup After...

System | Backups

This section allows users to manage the configuration of backups of the load balancer for quick disaster recovery, and clone...

System | Services

Contents1 Local Services1.1 HTTP Web GUI Service1.2 SSH Management Service1.3 SNMP Monitoring Service1.4 Rsyslog Logging Service1.5 Global Services2 Remote Services2.1...

System | RBAC | Roles | Update

RBAC Role Update In this section, you will be able to configure various parameters for the roles and enable/disable permissions...

System | RBAC | Roles | Create

Create RBAC Role To create a new role, select Create Role action. It will open the form to create a...

System | RBAC | Roles

RBAC Roles List RBAC Roles allows the management of roles based on objects and actions. A role defines a set...

System | RBAC | Groups | Update

This section is about configuring groups, adding users and resources, and learning how to remove them. The update section is...

System | RBAC | Groups | Create

Create Group To create a new group, click the Create Group button. A new form like the one below will...

System | RBAC | Groups

RBAC Groups This RBAC Groups section allows the management of resource-based groups. A group is a collection of users with...

System | RBAC | Users | Update

RBAC Users Update Learn more about configuring user-scoped parameters in this section, i.e. to give or remove permissions. Use the...

System | RBAC | Users | Create

Create RBAC Users To create a new user, open a new form by clicking the Create User button. A form...

System | RBAC | Users

RBAC User List RBAC Users allows a permission-based management of the system. A user can have two types of permissions:...

System | RBAC | Settings

Contents1 Role Based Access Control Settings2 Validation System Configuration3 Configuring LDAP validation connector4 Considerations Role Based Access Control Settings ZEVENET...

Network | Routing | Tables | Configure

In this section, you’ll learn more about the routing configuration tables of ZEVENET Load Balancer. We will describe how to...

Network | Routing | Tables

Routing Tables List Once the packet reaches the rule table, a decision is made and this part of the system...

Network | Routing | Rules

ZEVENET Load Balancer is designed to be integrated into as many subnets as possible. The system has been designed with...

Network | Gateway | Configure

This section describes how to update or modify the Default Gateway. On the table list containing the network gateways, hover...

Network | Gateway

In this section, users will learn how to configure a Default Gateway for IPv4 and IPv6 in the global routing...

Network | Floating IPs | Configure

This section describes how to configure a Floating IP of a given interface. The load balancer forwards outgoing traffic through...

Network | Floating IPs

Floating IPs (FIPs) and How they can save your business. A floating IP is a type of virtual IP address...

Network | Virtual Interface | Update

This section describes how to update and modify a Virtual interface. Global Settings These are the attributes you’ll work with...

Network | Virtual Interface | Create

This section explains the steps taken when creating a virtual interface and the various available options. Create Virtual Interface Here...

Network | Virtual Interface

Virtual Interfaces allow the assignment of more than one IP address per each NIC, Bonding, and VLAN interface configured in...

Network | VLAN | Update

This section describes how to update and modify a VLAN interface. Global Settings You may configure the following attributes on...

Network | VLAN | Create

This section explains how to create a VLAN interface and the different options available. Create VLAN Find the detailed descriptions...

Network | VLAN

VLAN interfaces (VLAN tagging) permit isolating logical network architectures at OSI layer 2 over the same physical NIC interface, each...

Network | Bonding | Update

This section describes how to update and modify a Bonding interface. There are two sections of the panel: Global Settings...

Network | Bonding | Create

This section explains how to create a bonding interface and the available options. Create Bonding The detailed options to create...

Network | Bonding

Bonding interfaces (also known as link bundling, port trunking, channel bonding, link aggregation, NIC teaming, etc) allow the connection of...

Network | NIC | Update

In this section, you’ll learn how to change the configuration settings of a NIC. Global Networking NIC Settings The following...

Network | NIC

This section describes how to configure and operate non-virtual Network Interface Cards. NIC Interfaces Table This table lists all the...

Network | Aliases

Aliases provide a user-friendly management for the backends and the networking IP addresses to improve usability. These also create an...

Monitoring | Farmguardians | Update

By default, ZEVENET runs basic health checks on the backends or real servers, but sometimes these checks are not enough...

Monitoring | Farmguardians | Create

A user may extend Farmguardian by creating custom farmguardian checks. These can copy from other checks and will use those...

Monitoring | Farmguardians

The Farmguardian section lists all the available health checks in the load balancer. It also includes a short description of...

Monitoring | Network Stats

Monitoring Network Stats In this section, you’ll learn about the necessary stats for tracking inbound and outbound traffic passing through...

Monitoring | System Stats

Contents1 Monitoring System Stats1.1 Monitoring System Memory1.2 Monitoring System CPU1.3 Monitoring System Load Monitoring System Stats This section shows statistics...

Monitoring | Farms Stats

Monitoring Farms Stats This section shows every detail about farms and load balancing services statistics. It shows a table with...

Monitoring | Stats

This section shows detailed information about the statistics related to the performance, behavior, and interfaces that are present on the...

Monitoring | Graphs

This section connects all the Systems, Network Interfaces, Farm Services, and Monitoring Graphs. You will need this when you want...

IPDS | WAF | Files | Update

Edit WAF file In this section, you’ll learn how to update files in the WAF module. These files may be...

IPDS | WAF | Files | Create

Create IPDS WAF File The files for internal use in the WAF module are created in this section. Those files...

IPDS | WAF | Files

IPDS WAF files The WAF rulesets can be used with additional files to extend the rules and order them for...

IPDS | WAF | Update

This section shows all the settings available for the current WAF rule set organized in three tabs, Global, Rules, and...

IPDS | WAF | Create

WAF Rulesets List This section shows how to create a new set of WAF rules. A ruleset is a group...

IPDS | WAF

Web Application Firewall The Web Application Firewall (WAF) is the tool used to detect and block malicious HTTP traffic going...

IPDS | RBL | Domains

RBL Domains These domains point to servers that maintain a list of bad reputation IP addresses. A server’s IP address...

IPDS | RBL | Rules Update

Global Settings for RBL rules The configurable options of every RBL rule are described below. Name. The descriptive name of...

IPDS | RBL | Rules Create

Create RBL rule In this section, you’ll learn how to create a new IPDS RBL rule. Compose a new custom...

IPDS | RBL

The IPDS or Intrusion and Prevention Detection System section within the IPDS module allows the configuration and setting of protection...

IPDS | DoS | Update

This section shows the DoS protection rules configuration organized in two tabs, i.e. the Global and the Farms tabs. Beware...

IPDS | DoS | Create

Creating customized DoS rules prevent attacks to certain farm services. To create a new DoS rule select Actions >> Create...

IPDS | DoS

The DoS or Denial of Service section within the IPDS module permits to configure and set protection rules at System...

IPDS | Blacklists | Update

Contents1 Explore Settings for Current Blacklist2 Local Blacklist Global Configuration2.1 Sources3 Remote Blacklist Global Configuration3.1 Updates4 Farms Blacklist Configuration Explore...

IPDS | Blacklists | Create

Create Blacklist Designing a personalized blacklist involves structuring a collection of IP addresses and subnets that pertain exclusively to your...

IPDS | Blacklists

The Intrusion Prevention and Detection System, known as IPDS, module introduces an array of advanced security tools to safeguard your...

IPDS | Settings

This section describes how to install or schedule updates for the IPDS package for Intrusion Prevention and Detection Service. IPDS...

DSLB | Farms | Update

Global Settings for DSLB Farms These are the global settings you will use to configure the DSLB farm. Find a...

DSLB | Farms | Create

Create Farm DSLB To create a DSLB farm, go to the DSLB >> Farms section, and click the Create Farm...

DSLB | Farms

The Datalink Service Load Balancing(DSLB), also known as Uplinks Load Balancing, allows the of creation of highly available and scalable...

GSLB | Stats | Graphs

GSLB Farm Stats Graphs This section shows the monitoring graphs and history of both established and pending connections of the...

GSLB | Stats | Backends

This section shows a detailed status of the GSLB farm Backend Stats, Client requests, Server requests, and Extended Stats. Contents1...

GSLB | Stats

GSLB Farm Stats Find all GSLB farm statistics in this section. The stats include both established and pending connections for...

GSLB | Farms | Create

In this section, you will be able to create GSLB farms. Create Farm GSLB After selecting the Create Farm action...

GSLB | Farms

GSLB Farms Overview The Global Service Load Balancing (GSLB), allows load balancing at a DNS level. At this level, requests...

LSLB | Stats | Backends

This section shows two tables, a table with both established and pending connections per backend (Backends Table), and another table...

LSLB | Stats | Graphs

Farms Graph Stats This section shows the monitoring graph history of established and pending connections of current farms in four...

LSLB | Stats

LSLB farms stats Find all LSLB farm statistics in this section. The stats include both established and pending connections for...

LSLB | SSL Certificates | Info

This segment pertains to accessing insights regarding SSL Certificates. Upon selecting any name within the Common Name category, the certificate’s...

LSLB | SSL Certificates | Upload

In this segment, you’ll incorporate Secure Socket Layer (SSL) Certificates into the LSLB farm through the Certificate Upload action. Hitting...

LSLB | SSL Certificates | Generate CSR

Create Certificate Signing Request (CSR) Within this segment, you’ll initiate the process of generating Secure Socket Layer (SSL) Certificates for...

LSLB | SSL Certificates

List of SSL Certificates Contained in this segment is an inventory of certificates that reside within the appliance, primed for...

LSLB | Farms | Update | L4xNAT Profile

Contents1 Global Settings for L4xNAT Farm Profile1.1 Basic configuration1.2 Advanced configuration2 Service settings2.1 Persistence2.2 Farmguardian2.2.1 Backends3 IPDS Rules for L4xNAT...

LSLB | Farms | Update | HTTP Profile

Contents1 Global Settings for HTTP Farm Profile1.1 Basic configuration1.2 HTTPS Parameters1.3 Advanced settings1.4 HTTP error messages1.5 Headers1.6 Services Settings1.7 Redirect1.8...

LSLB | Farms | Update

Update HTTP and L4xNAT profiles This section enables users to edit or change, and update various configurations of the LSLB...

LSLB | Farms | Create Farm

In this section, you will be able to create LSLB farms. These farms can be configured using two profiles: HTTP:...

Dashboard | News

Get the latest Updates, News and Press releases from ZEVENET.

Dashboard

Contents1 Dashboard | ZEVENET Enterprise 6.21.1 System Stats1.1.1 CPU Usage1.1.2 Memory Usage1.1.3 Load Usage1.1.4 Connections Graph1.1.5 System Information1.2 Farms Information1.3...

Login

Welcome to ZEVENET 6.2! Access to the ZEVENET web GUI If you’ve successfully installed or deployed ZEVENET 6.2, you will...

Download Skudonet ADC Load Balancer
Community Edition

Source Code

A versatile and installable ADC system designed for diverse vendor hardware.

DOWNLOAD SOURCE

Installable ISO 

Load Balancing as a Service alongside an ADC orchestration toolkit.

DOWNLOAD ISO
Download Community Edition

Download Community Edition

“We manage the information you provide with the sole aim of assisting with your requests or queries in regards to our products or services; applying the computer and security procedures to ensure its protection. Your data can be rectified or removed upon request but won’t be offered to any third parties, unless we are legally required to do so.” Responsible: SKUDONET SL - info@skudonet.com